Vista Remove Pci Ide Controller Driver Registry Editor

23-05-2021

Vista Remove Pci Ide Controller Driver Registry Editor

Pci Ide Controller Driver Download
Vista Remove Pci Ide Controller Driver Registry Editor Windows 7
Pci Ide Controller Driver
Vista Remove Pci Ide Controller Driver Registry Editor Download

6) Save changed registry hive HKEY_LOCAL_MACHINE SYSTEM to disk (F2) and exit Emergency Boot Kit Registry Editor. 7) Choose to reboot in the main menu of Emergency Boot Kit, go to BIOS setup and switch SATA controller to IDE mode before Windows is loaded, otherwise you get BSoD with stop code 0x0000007B: INACCESSIBLE_BOOT_DEVICE.
Registry key ControlSetxxx services service name> in target's system hive (xxx is default ControlSet number, the number in 'Default' value in 'Select' key, usually '001') You can find service name in.inf file (in AddService line) and txtsetup.oem in driver package.

AMD PCI IDE Controller Drivers Download In our share libs contains the list of AMD PCI IDE Controller drivers all versions and available for download. To download the proper driver by the version or Device ID.

May. 29, 2019 / Updated by Bessie Shaw to Windows 10

SATA AHCI mode makes the SATA hard drive run at its best, but if you didn’t enable the AHCI mode in BIOS, you won’t be able to enter Windows 10 normally or reinstall the system.

What Are the Advantages of AHCI Mode

SATA hard drive can work in IDE or AHCI mode, but the later, AHCI (Advanced Host Controller Interface) mode, is the better because it gives better read and write times and more extensive design support than the older IDE does. Choosing AHCI mode over IDE can also improve bandwidth speed in performance solid-state drives. So if you use AHCI mode, all the Serial ATA features are available.

How to Enable AHCI Mode and Improve SATA Hard Disk Performance

This tutorial will show you 3 methods of how to enable SATA AHCI mode in BIOS on Windows 10.

Method 1: Enable SATA AHCI Mode via Deleting SatrtOverride

Step 1. Use Windows shortcut keysWin + R to launch Run on Windows 10. Type regedit into the box and press the Enter.

Step 2. When the Registry Editor window pops up, navigate to the below location and then delete the file StartOverride.

HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesstorahci

Step 3. Open the Notepad and paste the below text into the box. Save the document as AHCI.bat.

reg delete 'HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesstorahci' /v StartOverride /f

Step 4. Right click on the file you’ve just saved and select Run as administrator.

Step 5. Type Yes into the pop-up Command Prompt window and hit the Enter.

Now you can restart the computer and enter the BIOS to enable the SATA AHCI mode. (If you don’t know the way to enter Windows 10 BIOS, see How to Enter BIOS on Windows 10, 8.1, 8, 7, Vista, XP.) Take Phoenix BIOS as an example.

Pci Ide Controller Driver Download

Step 1. Use the Right Arrow key to choose the Main tab.

Step 2. Use the Down Arrow key to highlight SATA Mode entry and press the Enter.

Step 3. Use the Down Arrow key to select AHCI Mode and press the Enter.

Step 4. Press F10 to save the changes and exit the BIOS.

See Also:Fix CMOS Checksum Error on Windows 10, 8.1, 8, 7, Vista, XP

Method 2: Enable AHCI Mode via Registry Modification

Step 1. Launch the Run and type into regedit, and then hit the Enter.

Step 2. When the Registry Editor window pops up, navigate to the following location:

HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesiaStorV

Step 3. Highlight the file iaStorV and double click on the Name Start in the right column. Modify the value as 0 and click on OK.

Step 4. Expand the iaStorV file and highlight the file StartOverride. Double click on the Name 0 in the right column and set the value to 0.

Step 5. Now navigate to the follow location and repeat the same value settings as step 3 and 4. (storahci-Name Start-value 0, storahci-StartOverride-Name 0-value-0)

HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesstorahci

HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesstorahciStartOverride

After the value modification, restart the computer and enter the BIOS to enable AHCI mode with the same steps as in Method 1.

Note: Don’t delete or modify values of other entries that you ain’t familiar with. Also, backup registry before any changes in case serious system problems occur, such as UNEXPECTED KERNEL MODE TRAP error on Windows 10, 100% disk usage, internal power error blue screen, etc..

Method 3: Enable AHCI Mode via Command Prompt

If you want to install Windows OS on a Solid State Drive and boot it successfully after enabling AHCI in the bios, you can also follow the steps below to enable AHCI mode.

Step 1. Right click on the Start menu and select the Command Prompt (Admin).

Step 2. Type bcdedit /set {current} safeboot minimal into the dialog box and press the Enter.

Vista Remove Pci Ide Controller Driver Registry Editor

Step 3. Close the window and restart the computer to enter the BIOS.

Step 4. Enable SATA AHCI mode in BIOS with the same steps as in Method 1, and then exit to boot into Windows safe mode automatically.

Step 5. In the safe mode, open the Command Prompt (Admin) and type into bcdedit /deletevalue {current} safeboot, and then hit the Enter.

After all of the steps, you can now restart the PC. You will successfully boot a Windows after enabling AHCI mode in the BIOS. However, if it does not work, switch the controller back to the IDE mode and enter the Windows to use Driver Talent to reinstall the SATA AHCI driver. And then take the step to re-enable AHCI mode to see if it works. If you have no Driver Talent installed on your PC, you could click the button below to get one.